A printable 3D model
Raised lines on a plate inside a frame, built from your drawing and checked to print well.
3D Doodle
Coming soon
Turn a photo into raised line art you can 3D print
The AI draws your photo as clean lines. Then we build a real, printable 3D model from it: raised lines on a plate, inside a frame, in the colours you choose. You download an STL or 3MF, not just a picture.
- 3 credits per AI drawing
- 10 free credits at launch
- 10 free credits when you sign up
- STL and 3MF for any slicer
Interactive demo
From photo to printable 3D model
Watch it play, or step through it yourself. The AI drawing is only the start: what you get is a real 3D model, ready to print.
1
Your photo
Upload a photo of a person, a pet or a place you love. Any photo you have the right to use works.
- People, pets, places and things
- A phone photo is all it takes
- Faces stay recognisable
2
AI drawing
Pick one of 130+ styles, or describe your own. In about a minute the AI redraws your photo as clean lines.
- Classic doodle
- Kawaii chibi
- Superheroes
- Pirates
- Ukiyo-e
- Caricature
- Astronauts
- Describe your own…
Choosing a style…
The AI is drawing…
Your drawing is ready
3 credits per AI drawing. If it fails, you get them back.
3
3D model
Now the drawing becomes a real, printable 3D model, not just a picture: every line stands up from a plate, inside a frame.
- Raised lines that cast real shadows
- A plate and a frame, printed with it
- 15, 20 or 25 cm, or a size you choose
- Fine, normal or bold lines
4
Colours
Pick a filament colour for the lines, the plate and the frame. The 3D model changes as you click, so try it.
Lines
Plate
Frame
Changing the colours, the size or the frame is always free.
5
Download & print
Download the model and open it in your slicer with one click.
STLSTL · one pieceFor any slicer and any printer
3MF3MF · parts with coloursLines, plate and frame as separate parts
Open in
- Bambu Studio
- OrcaSlicer
- PrusaSlicer
- Cura
Try another photo
What you get
A real model, not just a drawing
130+ drawing styles
Classic doodle, kawaii chibi, superheroes, pirates and many more, or describe your own.
Your colours, your size
Choose the filament for the lines, the plate and the frame, the size and the line thickness. Changes are free.
STL and 3MF for any slicer
One piece, or separate parts for multi-colour prints. One click opens Bambu Studio, OrcaSlicer, PrusaSlicer or Cura.
Real results
Drawn from real photos
Every drawing below started as an ordinary photo. Hover over a piece, or tap it, to see the original.
FAQ
3D Doodle questions
Which styles can I choose?
More than 130: classic doodle, kawaii chibi, superheroes, pirates, Japanese woodblock and many more. You can also describe a style of your own in a few words.
What sizes and frames are there?
15, 20 or 25 cm on the long side, or a size you type in. Pick one of 15 frame shapes or no frame, and fine, normal or bold lines. The 3D preview updates as you go, and changes are free.
Can I print it in more than one colour?
Yes. The 3MF keeps the lines, the plate and the frame as separate parts with their colours, ready for an AMS or a filament swap. Or print the STL in a single colour.
Your photo, raised off the wall
3D Doodle opens soon. At launch, sign up in seconds and get 10 free credits.
Sign up in seconds and get 10 free credits.